Floating Frame (smaller than 30 x 45)

This is the hanging option you will get if you order a Floating frame in a format smaller than 30 x 45.

Available for: Floating frame

Features

• Not visible from the front
• Indoor use only
• Accessories included
• Floating frame features: Wood, 3.7 cm frame height (side view), 1 cm frame thickness (front view), 8 mm gap between picture and frame
• Weight for floating frame: approximately 326.5 g /m
• Depth of the frame of the back: 2.5 cm

Available to order separately: Yes, you can order individual mountings in the Accessories section of our webshop.

Assembly instructions

Materials Required:

• Your Wall Art with a Floating frame
• Sawtooth Hanger set (contains 2 screws and 4 felt pads)
• A pencil
• A tape measure
• One nail or screw for wall installation (consider the weight of the frame and the wall material when choosing)
• A screwdriver
• A hammer or additional screwdriver, according to your chosen wall fasteners

1. Before hanging up the Wall Art on the wall, you will need to prepare the frame. Turn your Wall Art face down on a clean, soft surface to protect the art during installation. Glue the four felt pads to the corners of the Floating frame. This will protect your wall from scratches.
2. Attach the sawtooth hanger to the centre of your wall art using the screws provided.
3. Decide where you want your Wall Art to hang and mark the spot lightly with a pencil.
4. Mark the spot where the screw or nail will go into the wall.
5. Using a hammer or screwdriver, carefully install the nail or screw at the spot you marked. Leave a small portion protruding from the wall, so the hanger has somewhere to hang on.
6. Align the mount on the back of the Wall Art with the screw or nail on the wall, and gently hang your Wall Art. Step back and look at it from a few different angles. If needed, adjust using the notches in the sawtooth hanger to place your Wall Art in a horizontal position.

Congratulations your Wall Art is now hanging on the wall.